Your browser doesn't support javascript.
Show: 20 | 50 | 100
Results 1 - 10 de 10
Filter
1.
Brain Sci ; 13(3)2023 Mar 12.
Article in English | MEDLINE | ID: covidwho-2272240

ABSTRACT

Objective: The coronavirus belongs to the family of Coronaviridae, which are not branched single-stranded RNA viruses. COVID-19 creates respiratory problems and infections ranging from mild to severe. The virus features mechanisms that serve to delay the cellular immune response. The host's response is responsible for the pathological process that leads to tissue destruction. Temporomandibular disorders are manifested by painful jaw musculature and jaw joint areas, clicks, or creaks when opening or closing the mouth. All these symptoms can be disabling and occur during chewing and when the patient yawns or even speaks. The pandemic situation has exacerbated anxieties and amplified the vulnerability of individuals. Therefore, from this mechanism, how the COVID-19 pandemic may have increased the incidence of temporomandibular disorders is perceived. The purpose of this review is to evaluate whether COVID-19-related anxiety has caused an increase in temporomandibular dysfunction symptoms in adults to children. Methods: PubMed, Web of Science, Lilacs, and Scopus were systematically searched, until 30 July 2022, to identify studies presenting: the connection between COVID-19 with temporomandibular disorders. Results: From 198 papers, 4 studies were included. Literature studies have shown that the state of uncertainty and anxiety has led to an increase in the incidence of this type of disorder, although not all studies agree. Seventy-three studies were identified after viewing all four search engines; at the end of the screening phase, only four were considered that met the PECO, the planned inclusion, and the exclusion criteria. All studies showed a statistically significant correlation between temporomandibular disorders and COVID-19 with a p < 0.05. Conclusions: All studies agreed that there is an association between COVID-19 and increased incidence of temporomandibular disorders.

2.
Biomed Res Int ; 2022: 7091153, 2022.
Article in English | MEDLINE | ID: covidwho-1789049

ABSTRACT

Telemedicine is a subunit of telehealth, and it uses telecommunication technology, video, digital images, and electronic medical records to allow the exchange of clinical information and images over remote distances for dental consultation, diagnosis, and treatment planning. Dental clinical practice requires face-to-face interaction with the patients, and therefore, during the COVID-19 pandemic, it has mostly been suspended. In this view, teledentistry offers the opportunity to continue dental practice, avoiding the face-to-face examination that put patients and healthcare professionals at infection risk. Teledentistry encompasses several subunits such as teleconsultation, telediagnosis, telemonitoring, and teletriage. To date, there are several experiences described in literature that suggest that teledentistry could be applied to support traditional care of different oral diseases. However, there are some issues that need to be addressed. Reimbursement concerns, costs, license regulations, limits in physical examinations, and expert equipment are principal issues that should be overcome in telemedicine and in teledentistry. In this narrative review, we provide an overview of the different teledentistry approaches in the care of patients with dental and temporomandibular disorders, as well as discussing the issues that need to be addressed to implement this approach in clinical practice.


Subject(s)
COVID-19 , Telemedicine , Temporomandibular Joint Disorders , Delivery of Health Care , Humans , Pandemics , Telemedicine/methods , Temporomandibular Joint Disorders/diagnosis , Temporomandibular Joint Disorders/therapy
3.
Int J Environ Res Public Health ; 17(9)2020 04 30.
Article in English | MEDLINE | ID: covidwho-1725594

ABSTRACT

Recently, due to the coronavirus pandemic, many guidelines and anti-contagion strategies continue to report unclear information about the persistence of coronavirus disease 2019 (COVID-19) in the environment. This certainly generates insecurity and fear in people, with an important psychological component that is not to be underestimated at this stage of the pandemic. The purpose of this article is to highlight all the sources currently present in the literature concerning the persistence of the different coronaviruses in the environment as well as in medical and dental settings. As this was a current study, there are still not many sources in the literature, and scientific strategies are moving towards therapy and diagnosis, rather than knowing the characteristics of the virus. Such an article could be an aid to summarize virus features and formulate new guidelines and anti-spread strategies.


Subject(s)
Betacoronavirus/physiology , Coronavirus Infections/epidemiology , Coronavirus Infections/virology , Environmental Microbiology , Pandemics , Pneumonia, Viral/epidemiology , Pneumonia, Viral/virology , COVID-19 , Coronavirus Infections/transmission , Dental Offices , Humans , Medical Office Buildings , Pneumonia, Viral/transmission , Risk , SARS-CoV-2
4.
Materials (Basel) ; 15(1)2021 Dec 29.
Article in English | MEDLINE | ID: covidwho-1580596

ABSTRACT

The purpose of the present study was to evaluate the histological and histomorphometric characteristics of post-extraction sites grafted with decellularized bovine compact bone from bovine femur, mixed and unmixed with leukocyte- and platelet-rich fibrin after four months of healing. This study was designed as a randomized controlled trial of parallel groups. Patients in need of a single, implant-supported restoration to replace a hopeless tooth were recruited for tooth extraction and implant placement four months after socket preservation procedure. After tooth extraction, patients were randomly allocated to receive decellularized bovine compact bone from bovine femur, mixed and unmixed with leukocyte- and platelet-rich fibrin. After four months of healing, tapered implants were inserted with an insertion torque between 35 and 45 Ncm. Two months later, implants were loaded with screw-retained definitive crowns. Outcome measures were implant (ISR) and prosthesis (PSR) survival rates, complications, histological and histomorphometric analyses, radiographic marginal bone-level changes, and patients' satisfaction. Clinical data were collected up to one year after tooth extraction and socket preservation procedures. Thirty patients were consecutively enrolled in the trial (15 in each group). Unfortunately, due to the COVID-19 pandemic, bone samples were collected only in 19 patients. Two implants failed before definitive prosthesis delivery (ISR 93.3%). No prosthesis failed (PSR 100%). Three complications were experienced in the control group. The mean bone percentage was 40.64 ± 18.76 in the test group and 33.40 ± 22.38 in the control group. The difference was not statistically significant (p = 0.4846). The mean soft tissue percentage was 32.55 ± 19.45 in the test group and 55.23 ± 17.64 in the control group. The difference was statistically significant (p = 0.0235). The mean residual graft was 24.59 ± 18.39 in the test group and 11.37 ± 12.12 in the control group. The difference was not statistically significant (p = 0.0992). Mean marginal bone loss, as well as patient satisfaction, showed no differences between groups. With the limitations of the present study, socket preservation with L-PRF mixed with decellularized bovine compact bone demonstrated favorable results, comparing with decellularized bovine compact bone from bovine femur alone. Further studies with larger sample size and longer follow-up are needed to confirm these preliminary results.

5.
Int J Environ Res Public Health ; 18(5)2021 03 05.
Article in English | MEDLINE | ID: covidwho-1389360

ABSTRACT

The current Coronavirus disease 2019 (COVID-19) pandemic has affected the entire world population, and in particular the medical-health field, especially dentistry [...].

6.
Minerva Stomatol ; 69(5): 317-323, 2020 Oct.
Article in English | MEDLINE | ID: covidwho-1264746

ABSTRACT

INTRODUCTION: Dental profession has expanded, and the knowledge that oral health affects systemic health is of greater concern to patients. The purpose of this study is to understand the demand for dental treatments in Italy, knowing if there is any correlation between socioeconomic condition and oral rehabilitation typology. Moreover, focusing on the requested rehabilitations type and on finding alternatives, unconventional solutions. EVIDENCE ACQUISITION: The research was conducted using an important research database defined Google Trends, with search terms such as "dolore denti" (toothache). A statistical analysis has been conducted in this study evaluation Pearson Correlation Coefficient. EVIDENCE SYNTHESIS: The results divided region by region provide data that reflect the socio-economic conditions of the population concerned. Other results have been obtained from government source, to learn about the economic situations of the individual regions, for this reason the GDP was examined. Furthermore, there are important results regarding the parasanitary professions to which patients, for economic reasons, tend to refer. CONCLUSIONS: This study will surely be an excellent starting point to investigate professional abuse and above all to assess the needs of the different regions.


Subject(s)
Oral Health , Toothache , Humans , Italy/epidemiology , Socioeconomic Factors
7.
Gels ; 6(4)2020 Dec 03.
Article in English | MEDLINE | ID: covidwho-963137

ABSTRACT

Gel is a two-phase elastic colloidal material, consisting of a dispersed liquid incorporated in the solid phase [...].

8.
Eur J Dent ; 14(S 01): S146-S151, 2020 Dec.
Article in English | MEDLINE | ID: covidwho-962242

ABSTRACT

Coronavirus disease is now spreading in different countries of the world. The alarmism created through the media also creates confusion in people about virus spreading. The health care environments among which the dental practice could be places of spread of the virus, especially places where patients with systemic pathology could be exposed to this. The purpose of this article is to clarify coronavirus disease 2019 and its management in the dental practice. Only by following the normal guidelines on disinfection and sterilization of environments and operators, with some additional rules on the management of patients in the waiting room, it is possible to limit this risk. Limiting the risk of spreading the virus is one of the keys to its eradication.

9.
Data ; 5(3):81, 2020.
Article | MDPI | ID: covidwho-762506

ABSTRACT

The coronavirus pandemic is causing confusion in the world. This confusion also affects the different guidelines adopted by each country. The persistence of Coronavirus, responsible for coronavirus disease 2019 (Covid-19) has been evaluated by different articles, but it is still not well-defined, and the method of diffusion is unclear. The aim of this manuscript is to underline new Coronavirus persistence features on different environments and surfaces. The scientific literature is still poor on this topic and research is mainly focused on therapy and diagnosis, rather than the characteristics of the virus. These data could be an aid to summarize virus features and formulate new guidelines and anti-spread strategies.

10.
Non-conventional | WHO COVID | ID: covidwho-548202

ABSTRACT

The pandemic caused by the new coronavirus has placed national health systems of different countries in difficulty, and has demonstrated the need for many types of personal protective equipment (PPE). Thanks to the advent of new three-dimensional printing technologies, it was possible to share print files (using stereolithography (stl)) quickly and easily, improve them cooperatively, and allow anyone who possessed the materials, a suitable 3D printer and these files, to print. The possibility of being able to print three-dimensional supports, or complete personal protective equipment has been of incredible help in the management of COVID-19 (Coronavirus Disease 2019). The times and the relatively low costs have allowed a wide diffusion of these devices, especially for the structures that needed them, mainly healthcare facilities. 3D printing, now includes different fields of application, and represents, thanks to the evolution of methods and printers, an important step towards the “digital world”.

SELECTION OF CITATIONS
SEARCH DETAIL